IP68 Waterproof Connector Installation Instruction - Shenzhen LeDe Electronic Co., Ltd

High Quality,Free Sample,Small Order Accept,Fast Lead Time

IP68 Waterproof Connector Installation Instruction

Posted: 2012-03-03 Hits: 64 views

The tool you need to use:

Wire Striper
Electric Soldering Iron

1. Wire Striping

2. Line Type Installation

a. Set the parts on the cable

The ring 1 must be set in the socket.

b. Soldering the wires to the pins, then tightening the Heat Shrinkable Tube.

c. Screw the female housing and the body.

d. Put the seal body in the body. (Note, Convex surface of the seal body must be inside.)

e. Screw the nut tightly onto the body, let the claws contract inward.

f. Installation of plug is the same as the socket.

g. Connecting installation


Mating plug and socket, screw the locker tightly onto the male housing. 

3 messages

  1. […] Useful article: AWG to Square mm Wire Gauge Table The IP Rating Of the Waterproof cable and connectors […]

  2. Gary Cooper
    2016/04/27 at 19:26:32

    Hi I would like to buy 4 of these as I cannot find them on the web. Can you help? Gary

    • admin
      2016/04/28 at 09:11:05

      Dear Gary,

      Many thanks for your inquiry.

      Our sales have contacted you by Email, kindly check it.

      Looking forward to working with you.

      Best regards.

      LeDe Electronic

Send your inquiry (We will reply you within 12 hours.)

Your Name *

Your Email * (Perfect Secrecy)

Your Website